Aerospace High-Performance Alloys

Aerospace High-Performance Alloys Market Outlook

The global aerospace high-performance alloys market is projected to reach USD 25.6 billion by 2035, growing at a CAGR of 5.8% from 2025 to 2035. This growth is primarily driven by the increasing demand for lightweight materials in aircraft manufacturing, which enhances fuel efficiency and overall performance. Additionally, the rising number of air travel passengers, coupled with innovations in aerospace technologies, is fueling the need for advanced alloys that can withstand extreme conditions. The growing trend of sustainability in the aerospace sector further emphasizes the need for high-performance materials that contribute to reduced emissions and energy consumption. Furthermore, the expansion of the aerospace supply chain and the increasing investments in R&D by major players are expected to create significant growth opportunities in this market.

Growth Factor of the Market

The aerospace high-performance alloys market is experiencing substantial growth owing to several factors that are shaping the industry landscape. One of the primary drivers is the increasing demand for fuel-efficient and lightweight materials in the aerospace sector, which directly correlates with the rising cost of fuel and environmental regulations. Manufacturers are actively seeking materials that can enhance the performance of aircraft while minimizing weight. Additionally, advancements in manufacturing technologies, such as additive manufacturing and advanced coatings, are enabling the production of complex components with high precision and durability. The expansion of the commercial aviation sector globally, driven by rising disposable incomes and the growth of low-cost carriers, is also propelling the need for high-performance alloys. Moreover, the defense sector's continued investments in next-generation military aircraft and technologies are contributing significantly to the demand for these specialized materials, further solidifying their importance in the aerospace supply chain.

Key Highlights of the Market

• The global aerospace high-performance alloys market is projected to reach USD 25.6 billion by 2035.
• Asia Pacific is expected to exhibit the highest CAGR during the forecast period.
• Nickel-based alloys hold a significant market share due to their high-temperature resistance.
• OEMs are the leading distribution channel for these alloys, driven by the growth of new aircraft production.
• The demand for aluminum-based alloys is on the rise, particularly in aerostructures applications.

By Product Type

Nickel-Based Alloys:

Nickel-based alloys are highly regarded in the aerospace industry due to their remarkable resistance to high temperatures and their ability to withstand corrosion. These materials are especially critical in applications such as turbine engines where operational temperatures can exceed 1,000 degrees Celsius. The superior mechanical properties of nickel-based alloys make them essential for components like gas turbine blades, combustion chambers, and heat exchangers. As the aerospace sector pushes for improved efficiency and performance in their engines, the utilization of nickel-based alloys is expected to grow. Furthermore, the ongoing advancements in alloy compositions and manufacturing processes are enhancing the capabilities of nickel-based alloys, further solidifying their position in the market.

Titanium-Based Alloys:

Titanium-based alloys are another crucial segment of the aerospace high-performance alloys market, known for their excellent strength-to-weight ratio and corrosion resistance. These properties make titanium alloys ideal for components where weight savings are paramount, such as in airframes and landing gear systems. The aerospace industry increasingly favors titanium for its ability to perform under extreme stress and its lightweight nature, which contributes to overall fuel efficiency. Additionally, the trend towards additive manufacturing is enhancing the production capabilities of titanium alloys, allowing for more complex and lightweight designs. As the demand for more fuel-efficient aircraft continues to rise, the importance of titanium-based alloys in the aerospace sector is expected to expand significantly.

Aluminum-Based Alloys:

Aluminum-based alloys are widely used in the aerospace industry due to their light weight, strength, and excellent corrosion resistance. These alloys are particularly prevalent in aerostructures, including fuselages and wings, where reducing weight is essential for improving fuel efficiency. The aerospace sector's constant pursuit of innovation has led to the development of advanced aluminum alloys that offer greater strength and durability than traditional ones. As the aircraft manufacturing industry moves towards more sustainable practices, the demand for aluminum-based alloys is likely to increase, owing to their recyclability and lower environmental impact. Furthermore, ongoing research and development in aluminum alloy technologies are expected to enhance their functionality and broaden their application areas within aerospace.

Steel-Based Alloys:

Steel-based alloys are utilized in various aerospace applications, primarily due to their high strength and toughness. Although they are heavier than aluminum and titanium, steel alloys are essential for components that require significant load-bearing capabilities, such as landing gear and structural support elements. These alloys are engineered to withstand extreme operational conditions, making them indispensable in certain applications. Innovations in steel metallurgy, such as the development of specialty steels and high-strength low-alloy steels, are improving their performance characteristics, thus expanding their use in the aerospace sector. As manufacturers continue to explore new grades of steel alloys for aerospace applications, their market share is anticipated to evolve.

Superalloys:

Superalloys, which are primarily nickel and cobalt-based, are specifically engineered to maintain their structural integrity and mechanical properties at elevated temperatures. These high-performance materials are predominantly used in aerospace gas turbine engines, where extreme heat and stress conditions are prevalent. Superalloys possess excellent creep resistance and oxidation resistance, making them ideal for critical applications within aircraft engines and exhaust systems. The growing demand for increased engine efficiency and the push for higher thrust-to-weight ratios are driving the use of superalloys in aerospace applications. With advancements in superalloy technologies and processing techniques, the aerospace high-performance alloys market is likely to see a sustained demand for these materials in the coming years.

By Application

Aerostructures:

Aerostructures represent a significant application segment within the aerospace high-performance alloys market. These structures form the essential framework of the aircraft, including wings, fuselage, and tail assemblies. The use of high-performance alloys in aerostructures is driven by the need for lightweight yet strong materials that can withstand varying stress loads and environmental conditions. Aluminum-based alloys are particularly popular in this domain due to their excellent strength-to-weight ratio. As the aerospace industry continues to innovate and develop new aircraft models with increased efficiency, the demand for specialized alloys that can enhance aerostructure performance is expected to grow significantly.

Engines:

The engine application segment is one of the most critical areas for aerospace high-performance alloys. Engine components are subjected to extreme temperatures and pressures, necessitating the use of materials that can withstand these harsh conditions without compromising performance. Nickel-based superalloys are particularly favored in this segment for their heat resistance and mechanical stability. The growing trend towards more fuel-efficient engines and the push for higher-performance turbofan engines are driving the demand for advanced high-performance alloys. As manufacturers continue to invest in innovation and research, the use of these alloys in aerospace engines will likely see considerable growth.

Landing Gear:

Landing gear systems are subjected to high mechanical loads during takeoff and landing, making the selection of appropriate materials crucial. High-performance alloys play a vital role in ensuring the safety and reliability of landing gear components. Steel-based alloys are commonly used in this application due to their toughness and strength. Additionally, titanium alloys are gaining traction as manufacturers seek to reduce weight without compromising performance. As the aerospace industry focuses on enhancing aircraft reliability and longevity, the demand for high-performance materials in landing gear applications is expected to increase, driving growth in this segment.

Interiors:

The interiors of aircraft also require high-performance alloys, particularly for components that need to balance aesthetics, weight, and safety. Alloys such as aluminum are often used in cabin structures and fittings due to their lightweight and corrosion-resistant properties. With the growing emphasis on passenger comfort and experience, manufacturers are increasingly looking for materials that can provide both durability and aesthetic appeal. The trend towards more luxurious and technologically advanced aircraft interiors is likely to drive the demand for specialized high-performance alloys in this segment. As innovations in interior design and materials continue, the aerospace high-performance alloys market will benefit from increased applications in aircraft interiors.

Others:

In addition to the major application segments mentioned, there are several other applications where aerospace high-performance alloys are utilized. These include components used in auxiliary systems, fuel tanks, and various engine accessories. The versatility of high-performance alloys allows them to be employed in a wide range of aerospace applications beyond primary structures and engines. As aerospace technology continues to evolve, the need for innovative materials that can enhance performance and safety across all aircraft systems is expected to increase. Consequently, the 'Others' category will likely experience growth as manufacturers explore new uses for high-performance alloys in emerging aerospace technologies.

By Distribution Channel

OEMs:

Original Equipment Manufacturers (OEMs) represent a crucial distribution channel in the aerospace high-performance alloys market. This segment encompasses companies that design and manufacture aircraft, engines, and other critical components, sourcing high-performance alloys to ensure optimal performance and safety. OEMs are increasingly focused on developing new aircraft models that meet rising fuel efficiency standards and performance requirements, which drives the demand for specialized alloys. The close collaboration between OEMs and alloy manufacturers is vital for ensuring that the materials meet strict aerospace regulations and performance specifications. As the aerospace industry shifts towards more efficient and technologically advanced aircraft, the role of OEMs in driving demand for high-performance alloys will remain significant.

Aftermarket:

The aftermarket distribution channel is also gaining traction in the aerospace high-performance alloys market, as it encompasses the parts and services needed for maintenance, repair, and overhaul (MRO) of aircraft. As the global fleet of aircraft continues to grow, the need for quality replacement parts, including those made from high-performance alloys, becomes increasingly important. Aftermarket demand is influenced by factors such as aircraft age, flight hours, and regulatory requirements for maintenance. High-performance alloys play a critical role in ensuring the longevity and reliability of aircraft components, making them essential for MRO activities. The growth of the aftermarket segment is expected to contribute to the overall demand for aerospace high-performance alloys as airlines and operators seek to maintain and enhance operational efficiency.

By Ingredient Type

Iron:

Iron is a fundamental ingredient in many aerospace high-performance alloys, particularly in steel-based alloys. While not as lightweight as other materials, iron-based alloys offer exceptional strength and toughness, making them suitable for critical components that must endure high stress and impact. The versatility of iron allows for various alloy compositions that can be tailored to meet specific performance requirements in aerospace applications. The demand for iron-based alloys is particularly evident in landing gear and structural components, where strength is paramount. As the aerospace industry pushes for improved safety and performance, iron remains a vital ingredient in high-performance alloys.

Nickel:

Nickel is a crucial ingredient in the formulation of several high-performance alloys, particularly nickel-based superalloys. Known for their excellent resistance to heat and corrosion, nickel alloys are predominantly utilized in aerospace engine applications, where they must withstand extreme operational conditions. The unique properties of nickel allow for the development of specialized alloys that meet the stringent requirements of aerospace components. As the aerospace sector continues to prioritize fuel efficiency and performance, the demand for nickel and nickel-based alloys is expected to grow significantly in the coming years.

Titanium:

Titanium is another key ingredient in the aerospace high-performance alloys market, valued for its impressive strength-to-weight ratio and corrosion resistance. Titanium alloys are particularly important in airframes and critical structural components where weight reduction is essential for overall aircraft performance. The aerospace industry increasingly recognizes the benefits of titanium, leading to its expanded use in diverse applications. Continuous research and innovation in titanium alloy technologies are likely to enhance their capabilities, driving further demand in the aerospace sector.

Aluminum:

Aluminum plays a vital role as an ingredient in aerospace high-performance alloys, particularly in the development of lightweight and durable materials for aircraft. Aluminum-based alloys are widely used in various applications, including aerostructures and interiors, due to their excellent corrosion resistance and high strength-to-weight ratio. The aerospace industry's constant drive towards more efficient and sustainable designs has amplified the demand for aluminum alloys, leading to ongoing research into advanced compositions that offer enhanced performance. As aircraft manufacturers seek to improve fuel efficiency and reduce emissions, aluminum will remain a key ingredient in the development of high-performance alloys.

Steel:

Steel is a crucial ingredient in many high-performance alloys, particularly in steel-based alloys used for various structural applications in the aerospace sector. Steel's inherent properties of strength and durability make it an essential material for components that require robust performance under high stress. While heavier than other materials, steel alloys are engineered to meet specific performance requirements, ensuring safety and reliability. The aerospace industry's ongoing innovations in steel metallurgy are expected to yield new alloys with improved characteristics, thereby enhancing the overall performance of aircraft components that utilize steel.

By Region

The aerospace high-performance alloys market exhibits significant regional variation, influenced by the concentration of aerospace manufacturing and the level of technological advancement in different areas. North America is currently the leading region in this market, driven by the presence of major aerospace manufacturers and a robust defense sector. The region accounted for approximately 40% of the market share in 2023, with a projected CAGR of 5.3% through 2035. The United States and Canada are home to numerous companies engaged in the development and production of advanced aerospace materials, further solidifying North America's position as a market leader.

Europe is also a prominent player in the aerospace high-performance alloys market, with major countries such as France, Germany, and the UK contributing significantly to its growth. This region is expected to account for about 30% of the global market share by 2035, propelled by ongoing investments in aerospace technologies and the push for greener aircraft solutions. The European aerospace sector is characterized by its strong collaboration between manufacturers and research institutions, fostering innovation in high-performance materials. Meanwhile, the Asia Pacific region is anticipated to witness the highest growth rate, driven by the expansion of commercial aviation and increasing domestic production capabilities. Countries like China and India are emerging as key players in the aerospace market, contributing to a projected CAGR of 6.5% during the forecast period.

Opportunities

The aerospace high-performance alloys market is poised for numerous opportunities driven by technological advancements and evolving industry needs. One of the most significant opportunities is the growth of additive manufacturing in the aerospace sector, which allows for the production of complex components with reduced waste and improved material properties. This technology is particularly well-suited for high-performance alloys, enabling manufacturers to create lightweight structures that were previously unattainable with traditional manufacturing methods. As the aerospace industry increasingly adopts additive manufacturing, the demand for high-performance alloys that can be utilized in these processes is expected to rise considerably. Furthermore, innovations in alloy compositions and coatings will enhance the performance of existing materials, opening up new application areas and expanding the market potential.

Another promising opportunity lies in the growing focus on sustainability and environmental compliance within the aerospace industry. As airlines and manufacturers strive to reduce their carbon footprints, the demand for high-performance alloys that contribute to fuel efficiency and lower emissions is likely to increase. The development of recyclable and sustainable materials will also play a crucial role in meeting industry standards and consumer expectations. This shift towards greener solutions presents a significant opportunity for manufacturers of high-performance alloys to innovate and position themselves as leaders in the market. Additionally, expanding investments in aerospace infrastructure in emerging markets will create new avenues for growth and collaboration, further enhancing the prospects for high-performance alloys in aerospace applications.

Threats

Despite the positive outlook for the aerospace high-performance alloys market, several threats could impact its growth trajectory. One of the primary threats is the volatility of raw material prices, particularly for key ingredients such as nickel and titanium, which are prone to fluctuations due to geopolitical factors and supply chain disruptions. Such volatility can affect manufacturers' production costs and may lead to increased prices for end consumers, potentially hindering market growth. Furthermore, competition from alternative materials, such as composites and advanced plastics, poses a challenge. As the aerospace industry continues to seek lightweight and high-performance solutions, the adoption of these alternative materials could reduce the demand for traditional high-performance alloys, creating pressure on alloy manufacturers to innovate continually.

Another significant threat is the stringent regulatory environment surrounding the aerospace industry. Compliance with safety and performance standards is paramount, and any changes in regulations could result in increased costs and extended timelines for product development and certification. Potential trade restrictions and tariffs can also disrupt the supply chain, complicating the procurement of essential raw materials and components. Additionally, the ongoing effects of the COVID-19 pandemic on the aerospace sector have highlighted the industry's vulnerability to external shocks, prompting manufacturers to reassess their strategies and supply chains. As these challenges persist, companies must adapt swiftly to mitigate risks and maintain competitiveness in the evolving landscape of the aerospace high-performance alloys market.

Competitor Outlook

• Alcoa Corporation
• United Technologies Corporation
• Magnesium Elektron
• Haynes International, Inc.
• Special Metals Corporation
• Precision Castparts Corp.
• Timet (Titanium Metals Corporation)
• Allegheny Technologies Incorporated
• Kobe Steel, Ltd.
• Carpenter Technology Corporation
• VDM Metals GmbH
• RTI International Metals, Inc.
• Nordic Aviation Capital
• Otto Fuchs KG
• Avio Aero

The competitive landscape of the aerospace high-performance alloys market is characterized by a diverse range of players, each contributing to the development and supply of advanced materials essential for the aerospace industry. Major companies like Alcoa Corporation and United Technologies Corporation hold significant market shares due to their extensive portfolios and strong global presence. Alcoa, for instance, specializes in producing lightweight and high-strength aluminum alloys that cater to various aerospace applications. The company's innovations in aluminum technology and commitment to sustainability position it as a leader in the market, further bolstered by its strong supply chain and partnerships with OEMs.

Haynes International, a prominent player in the production of high-performance nickel-based alloys, is also a key competitor in this market. The company focuses on advanced materials that can withstand extreme conditions, making them ideal for aerospace applications such as turbine engines and exhaust systems. Haynes' continuous investment in research and development ensures that its product offerings remain at the forefront of technology, allowing it to meet the evolving needs of the aerospace sector. Similarly, Precision Castparts Corp., renowned for its aerospace components and investment castings, heavily relies on high-performance alloys to deliver reliable products. The company's diverse manufacturing capabilities and strategic acquisitions have enhanced its position in the market.

As competition intensifies, companies like Titanium Metals Corporation (Timet) and Allegheny Technologies Incorporated are expanding their capabilities to capture a larger market share. Timet is renowned for its production of titanium alloys, which are essential for various aerospace applications due to their excellent strength-to-weight ratio. The company's focus on innovation and technology enables it to develop advanced titanium materials that cater to the unique requirements of the aerospace industry. On the other hand, Allegheny Technologies specializes in producing high-performance materials and is actively involved in research initiatives aimed at enhancing alloy performance. Its broad product portfolio and commitment to quality further strengthen its competitive position.

• 1 Appendix

  • 1.1 List of Tables
  • 1.2 List of Figures

• 2 Introduction

  • 2.1 Market Definition
  • 2.2 Scope of the Report
  • 2.3 Study Assumptions
  • 2.4 Base Currency & Forecast Periods

• 3 Market Dynamics

  • 3.1 Market Growth Factors
  • 3.2 Economic & Global Events
  • 3.3 Innovation Trends
  • 3.4 Supply Chain Analysis

• 4 Consumer Behavior

  • 4.1 Market Trends
  • 4.2 Pricing Analysis
  • 4.3 Buyer Insights

• 5 Key Player Profiles

  • 5.1 Avio Aero
    • 5.1.1 Business Overview
    • 5.1.2 Products & Services
    • 5.1.3 Financials
    • 5.1.4 Recent Developments
    • 5.1.5 SWOT Analysis
  • 5.2 Otto Fuchs KG
    • 5.2.1 Business Overview
    • 5.2.2 Products & Services
    • 5.2.3 Financials
    • 5.2.4 Recent Developments
    • 5.2.5 SWOT Analysis
  • 5.3 VDM Metals GmbH
    • 5.3.1 Business Overview
    • 5.3.2 Products & Services
    • 5.3.3 Financials
    • 5.3.4 Recent Developments
    • 5.3.5 SWOT Analysis
  • 5.4 Kobe Steel, Ltd.
    • 5.4.1 Business Overview
    • 5.4.2 Products & Services
    • 5.4.3 Financials
    • 5.4.4 Recent Developments
    • 5.4.5 SWOT Analysis
  • 5.5 Alcoa Corporation
    • 5.5.1 Business Overview
    • 5.5.2 Products & Services
    • 5.5.3 Financials
    • 5.5.4 Recent Developments
    • 5.5.5 SWOT Analysis
  • 5.6 Magnesium Elektron
    • 5.6.1 Business Overview
    • 5.6.2 Products & Services
    • 5.6.3 Financials
    • 5.6.4 Recent Developments
    • 5.6.5 SWOT Analysis
  • 5.7 Nordic Aviation Capital
    • 5.7.1 Business Overview
    • 5.7.2 Products & Services
    • 5.7.3 Financials
    • 5.7.4 Recent Developments
    • 5.7.5 SWOT Analysis
  • 5.8 Precision Castparts Corp.
    • 5.8.1 Business Overview
    • 5.8.2 Products & Services
    • 5.8.3 Financials
    • 5.8.4 Recent Developments
    • 5.8.5 SWOT Analysis
  • 5.9 Haynes International, Inc.
    • 5.9.1 Business Overview
    • 5.9.2 Products & Services
    • 5.9.3 Financials
    • 5.9.4 Recent Developments
    • 5.9.5 SWOT Analysis
  • 5.10 Special Metals Corporation
    • 5.10.1 Business Overview
    • 5.10.2 Products & Services
    • 5.10.3 Financials
    • 5.10.4 Recent Developments
    • 5.10.5 SWOT Analysis
  • 5.11 RTI International Metals, Inc.
    • 5.11.1 Business Overview
    • 5.11.2 Products & Services
    • 5.11.3 Financials
    • 5.11.4 Recent Developments
    • 5.11.5 SWOT Analysis
  • 5.12 United Technologies Corporation
    • 5.12.1 Business Overview
    • 5.12.2 Products & Services
    • 5.12.3 Financials
    • 5.12.4 Recent Developments
    • 5.12.5 SWOT Analysis
  • 5.13 Carpenter Technology Corporation
    • 5.13.1 Business Overview
    • 5.13.2 Products & Services
    • 5.13.3 Financials
    • 5.13.4 Recent Developments
    • 5.13.5 SWOT Analysis
  • 5.14 Allegheny Technologies Incorporated
    • 5.14.1 Business Overview
    • 5.14.2 Products & Services
    • 5.14.3 Financials
    • 5.14.4 Recent Developments
    • 5.14.5 SWOT Analysis
  • 5.15 Timet (Titanium Metals Corporation)
    • 5.15.1 Business Overview
    • 5.15.2 Products & Services
    • 5.15.3 Financials
    • 5.15.4 Recent Developments
    • 5.15.5 SWOT Analysis

• 6 Market Segmentation

  • 6.1 Aerospace High-Performance Alloys Market, By Application
    • 6.1.1 Aerostructures
    • 6.1.2 Engines
    • 6.1.3 Landing Gear
    • 6.1.4 Interiors
    • 6.1.5 Others
  • 6.2 Aerospace High-Performance Alloys Market, By Product Type
    • 6.2.1 Nickel-Based Alloys
    • 6.2.2 Titanium-Based Alloys
    • 6.2.3 Aluminum-Based Alloys
    • 6.2.4 Steel-Based Alloys
    • 6.2.5 Superalloys
  • 6.3 Aerospace High-Performance Alloys Market, By Ingredient Type
    • 6.3.1 Iron
    • 6.3.2 Nickel
    • 6.3.3 Titanium
    • 6.3.4 Aluminum
    • 6.3.5 Steel

• 7 Competitive Analysis

  • 7.1 Key Player Comparison
  • 7.2 Market Share Analysis
  • 7.3 Investment Trends
  • 7.4 SWOT Analysis

• 8 Research Methodology

  • 8.1 Analysis Design
  • 8.2 Research Phases
  • 8.3 Study Timeline

• 9 Future Market Outlook

  • 9.1 Growth Forecast
  • 9.2 Market Evolution

• 10 Geographical Overview

  • 10.1 Europe - Market Analysis
    • 10.1.1 By Country
      • 10.1.1.1 UK
      • 10.1.1.2 France
      • 10.1.1.3 Germany
      • 10.1.1.4 Spain
      • 10.1.1.5 Italy
  • 10.2 Asia Pacific - Market Analysis
    • 10.2.1 By Country
      • 10.2.1.1 India
      • 10.2.1.2 China
      • 10.2.1.3 Japan
      • 10.2.1.4 South Korea
  • 10.3 Latin America - Market Analysis
    • 10.3.1 By Country
      • 10.3.1.1 Brazil
      • 10.3.1.2 Argentina
      • 10.3.1.3 Mexico
  • 10.4 North America - Market Analysis
    • 10.4.1 By Country
      • 10.4.1.1 USA
      • 10.4.1.2 Canada
  • 10.5 Middle East & Africa - Market Analysis
    • 10.5.1 By Country
      • 10.5.1.1 Middle East
      • 10.5.1.2 Africa
  • 10.6 Aerospace High-Performance Alloys Market by Region

• 11 Global Economic Factors

  • 11.1 Inflation Impact
  • 11.2 Trade Policies

• 12 Technology & Innovation

  • 12.1 Emerging Technologies
  • 12.2 AI & Digital Trends
  • 12.3 Patent Research

• 13 Investment & Market Growth

  • 13.1 Funding Trends
  • 13.2 Future Market Projections

• 14 Market Overview & Key Insights

  • 14.1 Executive Summary
  • 14.2 Key Trends
  • 14.3 Market Challenges
  • 14.4 Regulatory Landscape

Segments Analyzed in the Report

The global Aerospace High-Performance Alloys market is categorized based on

By Product Type

• Nickel-Based Alloys
• Titanium-Based Alloys
• Aluminum-Based Alloys
• Steel-Based Alloys
• Superalloys

By Application

• Aerostructures
• Engines
• Landing Gear
• Interiors
• Others

By Ingredient Type

• Iron
• Nickel
• Titanium
• Aluminum
• Steel

By Region

• North America
• Europe
• Asia Pacific
• Latin America
• Middle East & Africa

Key Players

• Alcoa Corporation
• United Technologies Corporation
• Magnesium Elektron
• Haynes International, Inc.
• Special Metals Corporation
• Precision Castparts Corp.
• Timet (Titanium Metals Corporation)
• Allegheny Technologies Incorporated
• Kobe Steel, Ltd.
• Carpenter Technology Corporation
• VDM Metals GmbH
• RTI International Metals, Inc.
• Nordic Aviation Capital
• Otto Fuchs KG
• Avio Aero